Asus RX3042H - Manual (Page 35)

RX3042H User's Manual Using the Configuration Manager
23
4 Using the Configuration Manager
The RX3042H includes a preinstalled program called the
Configuration Manager, which provides an interface to the software
installed on the device. It enables you to configure the device
settings to meet the needs of your network. You access it through
your web browser from any PC connected to the RX3042H via the
LAN or the WAN ports.
This chapter describes the general guides for using the
Configuration Manager.
4.1 Log into the Configuration Manager
The Configuration Manager program is preinstalled on the
RX3042H. To access the program, you need the following:
• A computer connected to the LAN or WAN port on the RX3042H
as described in the Quick Start Guide chapter.
• A web browser installed on the computer. The program is
designed to work best with Microsoft Internet Explorer® 6.0 or
later.
You may access the program from any computer connected to the
RX3042H via the LAN or WAN ports. However, the instructions
provided here are for computers connected via the LAN ports.
1. From a LAN computer, open your web browser, type the
following in the web address (or location) box, and press
<Enter>:
http://192.168.1.1
This is the predefined IP address for the LAN port on the
RX3042H. A login screen displays, as shown in Figure 4.1.