Asus P8H77-M PRO - Manual (Page 88)

3-22 Chapter 3: BIOS setup
Chapter 3
Marvell Storage OPROM [Enabled]
This item appears only when the Marvell Storage Controller item is set to [IDE Mode] or
[AHCI Mode] and allows you to enable or disable the Marvell Storage OPROM.
[Enabled]
Enables the Marvell Storage OPROM.
[Disabled] Disables the Marvell Storage OPROM.
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled]
[Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you
to select the Serial Port base address . Configuration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT). Configuration options: [Enabled]
[Disabled]
The following two items appear only when you set the Parallel Port item to [Enabled].
Change Settings [Auto]
Allows you to select the Parallel Port base address . Configuration options: [Auto]
[IO=378h; IRQ=5] [IO=378h; IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12]
[IO=3BCh; IRQ= 5,6,7,9,10,11,12]
Device Mode [STD Printer Mode]
Allows you to change the printer port mode. Configuration options: [STD Priinter Mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and
EPP 1.9 Mode] [ECP and EPP 1.7 Mode]