Asus P5N-E SLI - Manual (Page 76)

2-24 Chapter 2: BIOS setup
Memory Voltage [Auto]
Allows you to set the memory operating voltage. Set to Auto for safe
mode. Configuration options: [Auto] [1.920V] [2.013V] [2.085V]
[2.178V] [2.259V] [2.353V] [2.424V] [2.517V]
NB Core Voltage [Auto]
Allows you to set the NB core voltage.
Configuration options: [Auto] [1.208V] [1.393V] [1.563V] [1.748V]
VCore offset Voltage [Auto]
Allows you to set the VCore offset voltage.
Configuration options: [Auto] [+100mv]
Refer to the DDR2 documentation before setting the memory voltage.
Setting a very high memory voltage may damage the memory module(s)!
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to Set.
FSB & Memory Config
FSB - Memory Clock Mode [ Linked ]
FSB - Memory Ratio [Auto]
FSB (QDR), MHz [800]
Actual FSB (QDR), MHz 800.0
x MEM (DDR), MHz Linked
Actual MEM (DDR), MHz 533.3
Phoenix-Award BIOS CMOS Setup Utility
Advanced
FSB & Memory Config
This sub-menu allows you to set FSB & Memory config. Set the AI Tuning to
[Manual], if you want to configure this item.
FSB - Memory Clock Mode [Auto]
Allows you to set the FSB - Memory Clock Mode. Configuration options:
[Auto] [Linked] [Unlinked]