Asus P5G41-M SI/VGA - Manual (Page 20)

Dual display output support
• This table indicates that whether the following dual display outputs are supported for
your motherboard:
Dual display outputs Supported Not supported
DVI + D-Sub •
DVI + HDMI •
HDMI + D-Sub •
• During POST, only the monitor connected to the D-Sub port has display. The dual
display function works only under Windows.
12. PS/2 Keyboard port. This port is for a PS/2 keyboard.
1. CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total
of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of
the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. They are not jumpers! DO NOT
place jumper caps on the fan connectors.
CPU_FAN
GND CPU F
AN PWR
CPU F
AN IN
CPU F
AN PWM
P5G41-M SI
P5G41-M SI fan connectors
GND
+12V
Rotation
CHA_FAN
Only the 4-pin CPU fan connector supports the ASUS Q-FAN feature.
10. DVI port. This port is for any DVI-D compatible device. DVI-D can’t be converted to
output RGB Signal to CRT and isn’t compatible with DVI-I.
11. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray and other protected
content.
1.7.2 Internal connectors
Chapter 1: Product introduction 1-10