Asus O!Play Media Pro - Manual (Page 27)

ASUS O!PLAY MEDIA PRO 2-3
On confirmation, select OK to save settings or CANCEL to discard changes.
• On your computer, you may manually configure IP address settings.
• For more details, refer to the section Configuring the network clients in this
chapter.
Connecting to your local area network (LAN)
To connect to your local area network (LAN):
1. Connect one end of the RJ-45 cable to your LAN and the other end to the
Ethernet port at the back of your MEDIA PRO. MEDIA PRO..
2. Connect devices to your MEDIA PRO. MEDIA PRO..
For more details, refer to the section Connecting devices to your Smart TV
Set-Top-Box in Chapter 1.
3. Follow steps 4-5 in the previous section Connect to your network.
• If you select DHCP IP (AUTO), key in the DNS server’s IP address. The
DNS server automatically assigns an IP address for Media Pro. Media Pro..
• If you select FIX IP (MANUAL), key in the IP address and Subnet Mask.
• You may use the Fix IP address default settings:
• IP Address: 192.168.0.2
• Subnet mask: 255.255.255.0
• You may also obtain the IP address and subnet mask from your Internet
Service Provider (ISP).
• The IP addresses of your HD media player and your computer should be
unique, but in the same workgroup and subnet. in the same workgroup and subnet.
• If you cannot connect to your LAN, contact your network administrator.
• If you want to access files found on a PC, ensure that the computer’s files are
If you want to access files found on a PC, ensure that the computer’s files are
shared on the network. Fore more details, refer to the section Sharing files
over the network in this chapter.
4. On the confirmation message, select OK to save settings or CANCEL to discard discard
changes.
5. On your computer, you may manually configure the IP settings.
For more details, refer to the section Configuring the network clients in this
chapter.
e7276_oplays3_contents.indb 3 4/5/12 3:31:51 PM