Asus ET1611PUT - Manual (Page 22)

English
22 ASUS All-in-one PC ET1611 Series
Positioning your ASUS All-in-one PC
Placing on the desktop
Place your ASUS All-in-one PC on a flat surface such as a table or desk, and pull the stand open pull the stand open
until it snaps in place. Then, tilt the display panel to an angle of between 10 and 35 degrees
from an upright position.
0° 10°
Mounting to the wall
To mount your ASUS All-in-one PC to the wall, purchase an optional wall mount adapter
(160mm x 92mm) and a wall mount kit (pad and rack). Mount your ASUS All-in-one PC
according to the following instructions.
1. Remove the four screws on the stand to
release the stand. Keep the screws for
future use in case you want to reinstall the
stand.
0°
35°