Asus T3-PH1 - Manual (Page 4)

iv
English
Installation
IMPORTANT! Refer to the system user guide for installation details and
other system information.
Removing the cover
1. Locate and remove three cover
screws.
2. Pull the cover toward the rear panel
(A), then lift (B).
Installing the CPU
IMPORTANT! Before installing the
CPU, remove the two rubbers (A and
B) attached to the bottom of the
cooler / fan.
A
B
Lifting the power supply unit
1. Locate and remove the two screws.
2. Lift the PSU in the direction of the
arrow to a 90º angle.
1
1
2 IMPORTANT! When removing the
PSU, make sure to hold or support
it firmly. The unit might accidentally
drop and damage the other system
components.
A
B
Load lever
Retention tab
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
To install a CPU:
1. Locate the CPU socket on the
motherboard.
2. Press the load lever with your thumb
(A), then move it to the left (B) until
it is released from the retention tab.
A
A
B