Asus Eee PC 1011BX - Manual (Page 26)

Chapter 2: Getting Started 2-2
Powering on your Eee PC
These are only quick instructions for using your Eee PC.
1. Install the battery pack 2. Connect the AC power
adapter
• When you open the display panel, do not force it down to the table
or else the hinges may break! Never lift the Eee PC by the display
panel!
• Only use battery packs and power adapters supplied with this Eee
PC or specifically approved by the manufacturer or retailer for use
with this model or else damage may occur to the Eee PC. The input
voltage range between the wall outlet and this adapter is AC 100V–
240V.
• Never attempt to remove the battery pack while the Eee PC is
turned ON, as this may result in the loss of working data.
3. Turn ON the Eee PC
Damage may occur if you use
a different adapter which is
not provided together with
your Eee PC to power it. You
may damage your battery
pack(s), adapter, and the
Eee PC with a faulty AC-DC
adapter.
Remember to fully charge the battery before first use and whenever
it is depleted to prolong battery life.
1
2 3