Asus Vintage PE1 - Manual (Page 78)

5 - 2 8 5 - 2 8 5 - 2 8 5 - 2 8 5 - 2 8 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
CPU Q-Fan Control [Enabled] CPU Q-Fan Control [Enabled] CPU Q-Fan Control [Enabled] CPU Q-Fan Control [Enabled] CPU Q-Fan Control [Enabled]
Allows you to enable or disable the CPU Q-Fan feature that smartly adjusts
the fan speeds for more efficient system operation.
Configuration options: [Disabled] [Enabled]
CPU Q-Fan Mode [PWM] CPU Q-Fan Mode [PWM] CPU Q-Fan Mode [PWM] CPU Q-Fan Mode [PWM] CPU Q-Fan Mode [PWM]
Allows you to select the type of CPU fan cable connected to the CPU fan
connector. Set to [PWM] when using a 4-pin CPU fan cable. Set to [DC]
when using a 3-pin CPU fan cable. Configuration options: [PWM] [DC]
CPU/Chassis Fan Ratio [Auto] CPU/Chassis Fan Ratio [Auto] CPU/Chassis Fan Ratio [Auto] CPU/Chassis Fan Ratio [Auto] CPU/Chassis Fan Ratio [Auto]
Allows you to select the appropriate CPU and chassis fan speed ratio for
the system. The default [Auto] automatically selects the fan speed ratio
when operating a low chassis temperature. Select a higher ratio if you
installed additional devices and the system requires more ventilation. This
item appears only when the chassis Q-Fan Control item is Enabled.
Configuration options: [Auto] [60%] [50%] [40%] [35%]
CPU Target Temperature [xxxºC] CPU Target Temperature [xxxºC] CPU Target Temperature [xxxºC] CPU Target Temperature [xxxºC] CPU Target Temperature [xxxºC]
Allows you to set the CPU temperature threshold when the CPU fan speed
is increased to lower the CPU temperature. This item appears only when
the CPU Q-Fan Control item is Enabled. The configuration options vary
depending on the CPU installed.
Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
chassis fan speed in rotations per minute (RPM). If the fan is not connected
to the chassis, the specific field shows N/A. Select Ignored if you do not
wish to display the detected fan speed.
Chassis Q-Fan Control [Enabled] Chassis Q-Fan Control [Enabled] Chassis Q-Fan Control [Enabled] Chassis Q-Fan Control [Enabled] Chassis Q-Fan Control [Enabled]
Allows you to enable or disable the chassis Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
The CPU Q-Fan Mode, CPU/Chassis Fan Ratio, and CPU Target
Temperature items appear when you enable the CPU Q-Fan Control
feature.