Asus k8v se deluxe motherboard 4-17 – Asus K8V SE Deluxe User Manual
Page 83
ASUS K8V SE Deluxe motherboard
4-17
Memory Configuration
Memory Configuration
The Memory configuration menu item allows you to change the
memory settings. Select an item then press <Enter> to display the
sub-menu.
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto]
or select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Limit]
Memclock to CPU Ratio [1:1 (DDR 200)]
Sets the memory clock to CPU ratio.
Configuration options: [1:1 (DDR 200)] [4:3 (DDR 266)] [3:2]
[5:3 (DDR 333)] [2:1 (DDR 400)]
Bank Interleaving [ Auto]
Sets whether to allow memory accesses to be spread out over BANKS
on the same node or across nodes, decreasing access contention.
Configuration options: [Auto] [Disabled]
CAS Latency (CL) [Auto]
Sets the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5]
Memory Configuration
MEMCLK can be set
by the code using
Memclock Mode
[Auto]
AUTO, or if you use
Bank Interleaving
[Auto]
LIMIT, you can set
CAS Latency (CL)
[Auto]
one of the standard
TRC
[Auto]
values.
TRFC
[Auto]
TRCD
[Auto]
TWR
[Auto]
TRWT
[Auto]
TRAS
[Auto]
TRP
[Auto]
DDR Clock Delay
[Auto]
Memory Configuration
Memory Configuration
ECC Configuration