Asus RT-N16 - Manual (Page 12)

RT-N16 Multi-functional Gigabit Wireless N Router Quick Start Guide

English
Mounting options
Out of the box, the ASUS RT-N16 Wireless Router is designed
to sit on a raised flat surface like a file cabinet or a book shelf.
The unit may also be converted for mounting to a wall.
To mount the ASUS RT-N16 to a wall:
1. Look on the underside for the two mounting hooks.
2. Mark two upper holes on a wall.
3. Tighten two screws until only 1/4'' is showing.
4. Latch the hooks of the RT-N16 onto the screws.
Note: Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the
screws or if it is too loose.
Setting an IP address for wired or wireless client
To access the RT-N16 Wireless Router, you must have the correct TCP/IP settings on your
wired or wireless clients. Set the IP addresses of the clients within the same subnet of
RT-N16.
Getting an IP address Automatically
The ASUS Wireless Router integrates the DHCP server functions, hence, your PC can
automatically obtain an IP address from the ASUS Wireless Router.
Note: Before rebooting your PC, switch ON the wireless router and ensure that the
router is in ready state.
2. Accessing the wireless router
Q4485_RT-N16_QSG.indb 3 6/18/09 9:56:33 AM