Asus P5GD2 Premium - Manual (Page 133)

A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m A S U S P 5 G D 2 P r e m i u m 5 - 2 1 5 - 2 1 5 - 2 1 5 - 2 1 5 - 2 1
Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped) Creating a RAID 0 set (Striped)
To create a RAID set:
1. From the Silicon Image configuration utility main menu, select C r e a t e C r e a t e C r e a t e C r e a t e C r e a t e
R A I D s e t R A I D s e t R A I D s e t R A I D s e t R A I D s e t then press <Enter> to display an option menu.
2. Select R A I D 0 R A I D 0 R A I D 0 R A I D 0 R A I D 0 then press <Enter> to display the following.
3. Select your desired method of configuration.
A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n
a. Select Auto Configuration the press <Enter>.
b. The utility prompts a confirmation message, press <Y>.
MAIN MENU
Auto configuration
Manual configuration
By default, Auto configuration sets the stripe size to 64K and sets the
logical drives based on the physical drives installed.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE