Arcam FMJ DV139 - Manual (Page 10)

DV139
E-10
������
���� ���� ����� ���
���� ����� ���� �����
��� ��� ���� �����
���� �����
��
���� ���� �
� � �
� � �
� � �
� ����� ����
���� ������
CR-515 remote control
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, off).
CLEAR
Use
CLEAR to clear a numeric field.
Numeric keys
Gives direct access to individual tracks on audio
CDs. For tracks greater than 9, enter the digits in
sequence. For example, to play track 15, press
1 ,
then 5 , then OK .
HDMI
Selects the picture resolution for HDMI output.
MUTE
Press once to mute an Arcam amplifier. Press
again (or use
+/– volume) to un-mute.
Volume +/–
Adjusts the volume on Arcam remote-controllable
amplifiers.
Note that the volume (+/–) controls and
MUTE
button have no effect on the audio output level of
the DVD players.
OPEN
Opens and closes the disc tray
Page Up/Down (DVD-audio)/
Slow play (other discs)
DVD-audio: Some DVD-audio discs allow the user
to browse through images (photographs of the
artist, lyrics, etc.) while music is being played. Use
the
3 or 4 buttons to change to the previous/
next page. Note that this is not available on all
DVD-audio discs.
Other discs: Press
3 or 4 on the remote control
to play slow forward or backwards. Press the
button repeatedly to cycle through the different
speeds. To resume normal playback speed, press
PLAY .
Note that slow-play does not apply to audio CDs or
DVD-audio discs.
Navigation buttons
Arrow buttons allow navigation around the Basic
and Advanced Set-up menus on the DV139.
Confirm a selection by pressing
OK .
Playback control
Pause (
; ), Play ( 4 ) and Stop ( < ).
Fast play and Skip chapter/tracks
Play fast (
7 8 ) and Skip ( 0 / ) chapters/tracks
in both directions.
Advanced controls
These buttons are described on the next page.
On/Standby
This allows the DV139 to be put into and taken out
of stand-by remotely.
MENU
Activates the DVD menu if available.
SETUP
Ensure no disc is playing and press
SETUP to
access the ‘Setup’ menu.
Press
SETUP a second time to exit the setup menu.
SRCH (search)
Displays Search menu with Time, Title and Track
options.
STATUS
Press
STATUS to give play status information about
the current disc. Press STATUS again to close the
status display.
The status information displayed varies depending
on the type of disc – DVD, CD or VCD.
*
This button can be used to turn on backlighting
without affecting any action.
The CR-515 is a remote control designed for use
with Arcam DVD players. Some owners may wish to
use a dedicated remote in preference to a Universal
remote control.
If the remote control receiver
(located on the right of the front-
panel window) is not ‘visible’ to the
remote control hand-set, then the
remote control will not work! Either
locate the unit differently, or take
advantage of the remote control
input on the rear of the player
(consult your dealer for further
information on this option). Remember to install
the four AAA batteries
supplied before trying to
use your remote control.