Installing an expansion card installing a dimm, English – Asus V2-AE1 User Manual
Page 6
6
6
6
6
6
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
Q u i c k i n s t a l l a t i o n g u i d e
English
Installing an expansion card
Installing a DIMM
1.
Locate the DIMM sockets in the motherboard.
2.
Unlock a DIMM socket by pressing the retaining clips outward.
3.
Align a DIMM on the socket such that the notch on the DIMM matches
the break on the socket.
4.
Push the DIMM to the socket until the retaining clips snap inward.
•
Unplug the power supply before adding or removing DIMMs. Failure to
do so may cause damage to the motherboard and/or components.
•
A DDR DIMM is keyed with a notch so that it fits in only one direction.
Do not force a DIMM into a socket to avoid damaging the DIMM.
2.
Remove the metal bracket
lock.
1.
Remove the metal cover
opposite the slot that you
intend to use.
3.
Insert the card connector to
the slot, then press the card
firmly until it fits in place.
4.
Replace the metal bracket
lock.
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4