Using a dynamic ip (pppoe connection) – Asus ET1610PT User Manual
Page 29
Advertising
English
29
EeeTop PC ET16 Series
4. Select Use the following IP address.
5. Enter your
IP address, Subnet mask, and
Default gateway.
6. If needed, enter the
Preferred DNS
server address.
7. After entering all the related values, click
OK to finish the configuration.
Using a dynamic IP (PPPoE connection)
1. Repeat steps 1–3 in the previous section.
2
Select
Obtain an IP address
automatically and click OK.
3. Click Create a new connection to
start the New Connection Wizard.
Advertising
This manual is related to the following products: