Asus V3-P5P43 - Manual (Page 94)

5-18 Chapter 5: BIOS setup
The following item appears only when you set the AI.Overclocking item to
[Manual].
FSB / CPU External Frequency Synchronization
CPU.Frequency.[xxx]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to
adjust the CPU frequency. You can also type the desired CPU frequency using the
numeric keypad. The values range from 133 to 600. Refer to the table below for
the correct Front Side Bus and CPU External Frequency settings.
Overclock.Options.[Overclock.5%]
Allows you to select the overclock options. Configuration options: [Overclock 5%]
[Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
The following item appears only when you set the AI Overclocking item to
[Overclock Profile].
Front.Side.Bus CPU.External.Frequency
FSB 1333 333 MHz
FSB 1066 266 MHz
FSB 800 200 MHz
FSB 533 133 MHz
PCI.Express.Frequency.[xxx]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to
adjust the PCIe frequency. You can also type the desired PCIe frequency using the
numeric keypad. The values range from 90 to 150.
FSB.Termination.Voltage.[Auto]
Allows you to set FSB termination voltage or auto for safe mode.
Configuration options: [Auto] [1.20V] [1.30V] [1.40V] 1.50V]
MCH.Chipset.Voltage.[Auto]
Allows you to set MCH chipset voltage or auto for safe mode.
Configuration options: [Auto] [1.125V] [1.175V] [1.225V] [1.275]