A.3 troubleshooting – Asus ASMB4-iKVM User Manual

Page 78

Advertising
background image

A-4

Appendix: Reference information

A.3

Troubleshooting

Problem

Solution

The local/central server cannot connect

to the ASMB4-iKVM/ASMB4-SOL PLUS

board

1. Check if the LAN cable is connected

to the LAN port.

2. Make sure that the IP address of

both the remote and local/central

servers are on the same subnet.

(Refer to chapter 2 for details.)

Try “ping xx.xx.xx.xx” (remote

server ip) on local/central server

and make sure remote server could

reply the ping request.

3. Check if the IP source is set to

[DHCP]. When set to [DHCP], you’ll

not be able to configure the IP

address.

All the SEL (System Event Log)

cannot be displayed

The maximum SEL number is 900 events.

The date/time shown in SEL (System

Event Log) screen is incorrect

Refer to section 4.4.9 to check if the time

zone is set up correctly.

ASMB4-iKVM/ASMB4-SOL PLUS has

network connection problems in

Firewall environment

Ask MIS to add the following port

numbers in Firewall:

5123 (virtual floppy) (TCP)

5120 (virtual CDROM) (TCP)

623 (IPMI) (TCP & UDP)

80 (HTTP) (TCP)

7578 (iKVM) (TCP)

443 (HTTPs) (TCP)

161 (SNMP) (UDP)

The Java redirection screen cannot be

displayed normally

Click Refresh Page button to refresh the

redirection screen.

This troubleshooting guide provides answers to some common problems that you

may encounter while installing and/or using ASUS ASMB4-iKVM/ASMB4-SOL

PLUS. These problems require simple troubleshooting that you can perform by

yourself. Contact the Technical Support if you encounter problems not mentioned

in this section.

Advertising