Asus P5KPL-C - Manual (Page 54)

2-4 Chapter 2: BIOS setup
• This function can support devices such as USB flash disk, or floppy disk
with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
2.1.2 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self Tests (POST).
3. You can launch the EZ Flash 2 in two ways.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
Note
ASUSTek EZ Flash 2 BIOS ROM Utility V3.06
Current ROM
A:
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5KPL-C
VER: 0117
DATE: 11/08/07
(2) Enter BIOS setup program. Go to the Tools menu then select EZ Flash 2
and press <Enter>.
You can switch between drives by pressing <Tab> before the correct file
is found. Then press <Enter>.
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
Note
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown