Asus T2-R - Manual (Page 37)

37 ASUS Terminator 2 barebone system
2.10 Re-installing the power supply unit
Re-install the power supply unit (PSU) after installing the system
components and reconnecting the cables.
To reinstall the PSU:
1. Connect the 20-pin and 4-pin
power plugs to the ATXPWR and
ATX12V connectors on the
motherboard labeled ATXPWR
and ATX12V. See page 77 for
the location of these connectors.
2. Position the PSU over the
chassis.
3. Align the side hook with the
metal slot on the side of the
optical drive bay.
4. Slide the PSU toward the
direction of the rear panel until it
fits in place.
2
3
4
5. Secure the PSU with the screw
you removed earlier.
5
Make sure the PSU cables
do not interfere with the CPU
and chassis fans.
1
1