Asus M3N-HT Deluxe/Mempipe - Manual (Page 170)

5-46 Chapter 5: Software support
• For detailed descriptions on the NVIDIA ® RAID configuration, refer to the
“NVIDIA ® RAID User Guide” found in your motherboard Support DVD.
• When using Windows ® XP operating system, make sure to install the
Windows ® XP Service Pack 2 or later versions..
Make sure to re�enter your NVRAID settings after the CMOS is cleared;
otherwise, the system will not recognize your RAID setup.
Entering the NVIDIA ® RAID utility
To enter the NVIDIA ® RAID utility:
1. Boot up your computer.
2. During POST, press <F10> to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
[F6] Back [F7] Finish [TAB] Navigate [���] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Striping Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [�] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[�] Del