4 starting up for the first time, Starting up for the first time -17, Chapter 2 – Asus Z87-DELUXE User Manual

Page 75

Advertising
background image

ASUS Z87-DELUXE

2-17

Chapter 2

Connect to 7.1 channel Speakers

When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the

gray port.

2.4

Starting up for the first time

1.

After making all the connections, replace the system case cover.

2.

Ensure that all switches are off.

3.

Connect the power cord to the power connector at the back of the system chassis.

4.

Connect the power cord to a power outlet that is equipped with a surge protector.

5.

Turn on the devices in the following order:
a. Monitor
b. External SCSI devices (starting with the last device on the chain)
c. System power

6.

After applying power, the system power LED on the system front panel case lights up.

For systems with ATX power supplies, the system LED lights up when you press the

ATX power button. If your monitor complies with the “green” standards or if it has a

“power standby” feature, the monitor LED may light up or change from orange to green

after the system LED turns on.

The system then runs the power-on self tests (POST). While the tests are running, the

BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on

the screen. If you do not see anything within 30 seconds from the time you turned on

the power, the system may have failed a power-on test. Check the jumper settings and

connections or call your retailer for assistance.

Advertising
This manual is related to the following products: