Asus T2-PE1 - Manual (Page 93)

5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1
Onboard Firewire Device [Enabled] Onboard Firewire Device [Enabled] Onboard Firewire Device [Enabled] Onboard Firewire Device [Enabled] Onboard Firewire Device [Enabled]
Allows you to enable or disable the onboard Firewire (IEEE 1394) device.
Configuration options: [Disabled] [Enabled]
Onboard LAN [Enabled] Onboard LAN [Enabled] Onboard LAN [Enabled] Onboard LAN [Enabled] Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled] Onboard LAN Boot ROM [Disabled] Onboard LAN Boot ROM [Disabled] Onboard LAN Boot ROM [Disabled] Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
5.4.4 5.4.4 5.4.4 5.4.4 5.4.4 PCI PnP Configuration PCI PnP Configuration PCI PnP Configuration PCI PnP Configuration PCI PnP Configuration
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
IRQ-3 assigned to [PCI Device]
IRQ-4 assigned to [PCI Device]
IRQ-5 assigned to [PCI Device]
IRQ-7 assigned to [PCI Device]
IRQ-9 assigned to [PCI Device]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
NO: Lets the BIOS
configure all the
devices in the system.
YES: Lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
Plug and Play O/S [No] Plug and Play O/S [No] Plug and Play O/S [No] Plug and Play O/S [No] Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]