Asus M4N72-E - Manual (Page 60)

2-16 ASUS M4N72-E
CS/ODT Setup Time [Auto]
Allows selection of the CS/ODT setup time.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
Addr/Cmd Setup Time [Auto]
Allows selection of the Addr/Cmd setup time.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
The following seven (7) items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
2.4.4 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage.
2.4.5 CPU/NB Voltage [Auto]
Allows you to set the voltage between the CPU and Northbridge.
2.4.6 CPU VDDA Voltage [Auto]
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
set the CPU VDDA voltage. The values range from 2.50V to 2.80V with a 0.10V interval.
2.4.7 DRAM Voltage [Auto]
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
set the DRAM voltage. The values range from 1.80V to 2.50V with a 0.10V interval.
2.4.8 HT Voltage [Auto]
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
set the HyperTransport voltage. The values range from 1.20V to 1.50V with a 0.10V interval.
2.4.9 NB Voltage [Auto]
Allows you to set the NorthBridge voltage. The values range from 1.30V to 1.60V with a
0.10V interval.
2.4.10 NB 1.8V Voltage [Auto]
Allows you to set the NorthBridge 1.8V voltage. The values range from 1.80V to 2.00V with a
0.2V interval.
2.4.11 CPU/LDT Spread Spectrum [Disabled]
Set to [Disabled] to enhance FSB overclocking ability or [Enabled] for EMI control.
Configuration options: [Disabled] [Enabled]
2.4.12 PCIE Spread Spectrum [Disabled]
Set to [Disabled] to enhance PCIE overclocking ability or [Linear Down] for EMI control.
Configuration options: [Disabled] [Linear Down]