Asus V4-P5P43 - Manual (Page 9)

 Installation manual
English
Hard disk drive
1. Remove the 3.5-inch hard drive holder
out of the chassis.
NOTE: The 3.5-inch hard drive holder
is optional.
2. Insert the hard dis�� drive to the 3.5-
inch hard drive holder, then carefully
push the drive until its screw holes align with the holes on the holder.
3. Secure the hard dis�� drive with two screws on both sides of the bay.
4. Replace the hard drive holder to the chassis and secure the screws.
Installing storage drives
Optical drive
1. �lace the chassis upright, then
remove the upper 5.25” drive bay
metal plate cover.
2. Insert the optical drive to the bay, then
carefully push the drive until its screw
holes align with the holes on the bay.
3. Secure the optical drive with two
screws on both sides of the bay.
4. Connect the IDE (A) and power (B)
plugs to connectors at the bac�� of the
drive.
Floppy disk drive
If the system comes without a portable hard dis�� (optional), then you may install a
floppy disk drive into the 3.5-inch drive bay.
1. �lace the chassis upright, then
remove the upper 3.5” drive bay metal
plate cover.
2. Insert the floppy disk drive to the bay,
then carefully push the drive until its
screw holes align with the holes on the
bay.
3. Secure the floppy disk drive with two
screws on both sides of the bay.
4. Connect the signal (A) and power (B)
plugs to connectors at the bac�� of the
drive.
2
B
A
3
3
2
3
3
A
B
2
3
3