Asus CM1745 - Manual (Page 57)

EN
G
LIS
H
EN
G
LI
SH
ASUS CM1745 57
EN
G
LIS
H
EN
G
LI
SH
Recovering your system
Using the system recovery partition
The system recovery partition quickly restores your Desktop PC’s software to its original
working state. Before using the system recovery partition, copy your data files (such as
Outlook PST files) to USB storage devices or to a network drive and make note of any
customized configuration settings (such as network settings).
About the system recovery partition
The system recovery partition is a reserved space on your hard disk drive used to restore the
operating system, drivers, and utilities installed on your Desktop PC at the factory.
DO NOT delete the system recovery
partition, which is the partition without
volume label on Disk 0. The system
recovery partition is created at the
factory and cannot be restored if
deleted. Take your Desktop PC to an
authorized ASUS service center if
you have problems with the recovery
process.
Using the system recovery partition:
1.
Press <F9> during bootup.
. Press <Enter> to select Windows Setup [EMS Enabled].
3. Select one of the following recovery options.
System Recovery:
This feature allows you to restore the system to the factory default settings.
System Image Backup:
This feature allows you to burn the system image backup in DVD discs, which you can use
later to restore the system to its default settings.
System D�D Backup:
This feature allows you to make a backup copy of the support DVD.
4. Follow the onscreen instructions to complete the recovery process.
Visit the ASUS website at www.asus.com for updated drivers and utilities.