Shot & send – Asus P8P67 User Manual
Page 9
ASUS DIGI+ VRM • BT GO! User Guide
9
Shot & Send
This function allows you to snap and transfer the screenshot to the connected BT device.
Using Shot & Send
1.
From the device list, select the connected BT device that you want to use for this
function.
2.
Click the Shot & Send icon enable this function.
3.
The default destination folder is the folder that you select when you use Shot &
Send, BT Transfer, or Folder Sync for the first time. To change the destination
folder, click the Folder icon to locate another destination folder.
4.
Select the Hot Key combination that you will use for capturing a screenshot on your
computer.
5.
Select the capture type from Fullscreen and Active Window. Active Window
means the currently selected window.
6.
From your computer, click the selected Hot
Key combination to capture a screenshot.
Then, a transferring mark appears below the
connected BT device icon.
7.
In the meantime, you will receive the
screenshot transferring notice from the
connected BT device. Confirm the notice to receive the transferred screenshot.
8.
To disable this function, click the Shot & Send icon again.
Do not change the settings in the setting pane while transferring the captured file.
Folder icon