Asus RS300-E8-RS4 - Manual (Page 116)

6-8 Chapter 6: RAID configuration
6.2.3 Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID and press
<Enter>.
2. Press the up/down arrow keys to select the drive(s) or disks of the RAID set
you want to reset, then press <Space>. A small triangle before the Port number
marks the selected drive. Press <Enter> when you are done.
3. Press <Y> in the confirmation window to reset the drive(s) or press <N> to return
to the utility main menu.
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Member Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Member Disk
Select the disks that should be reset.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
[ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[ RESET RAID DATA ]
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)