Asus SABERTOOTH 990FX/GEN3 R2.0 - Manual (Page 109)

ASUS SABERTOOTH 990FX/GEN3 R2.0 3-39
Chapter 3
3.8.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Save BIOS settings to Profile
Back Tool\ ASUS O.C. Profile >
UEFI BIOS Utility - Advanced Mode
O.C. Profile Configuration
Setup Profile 1 Status : Not Installed
Setup Profile 2 Status : Not Installed
Setup Profile 3 Status : Not Installed
Setup Profile 4 Status : Not Installed
Setup Profile 5 Status : Not Installed
Setup Profile 6 Status : Not Installed
Setup Profile 7 Status : Not Installed
Setup Profile 8 Status : Not Installed
Add Your CMOS Profile
Label
Save to Profile 1
Add Your CMOS Profile
Load from Profile 1
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your BIOS settings, press <Enter>, and then select Yes.
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
• We recommend that you update the BIOS file only coming from the same memory/ We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.