Asus P3-PH4 - Manual (Page 74)

5 - 1 6 5 - 1 6 5 - 1 6 5 - 1 6 5 - 1 6 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
5.4.2 5.4.2 5.4.2 5.4.2 5.4.2 USB Configuration USB Configuration USB Configuration USB Configuration USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
CPU VCore Voltage [Auto] CPU VCore Voltage [Auto] CPU VCore Voltage [Auto] CPU VCore Voltage [Auto] CPU VCore Voltage [Auto]
Allows you to select the CPU VCore voltage. Configuration options:
[Auto][1.7000V] [1.6875V] [1.6750V] [1.6625V] [1.6500V] [1.6375V]
[1.6250V] [1.6125V] [1.6000V] [1.5875V] [1.5750V] [1.5625V]
[1.5500V] [1.5375V] [1.5250V] [1.5125V] [1.5000V] [1.4875V]
[1.4750V] [1.4625V] [1.4500V] [1.4375V] [1.4250V] [1.4125V]
[1.4000V] [1.3875V] [1.3750V] [1.3625V] [1.3500V] [1.3375V]
[1.3250V] [1.3125V] [1.3000V] [1.2875V]
Refer to the CPU documentation before setting the CPU Vcore voltage.
Setting a high Vcore voltage may damage the CPU!
The following item appears only when the A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g A I O v e r c l o c k i n g item is set
to [Overclock Profile].
Overclock Options [Overclock 5%] Overclock Options [Overclock 5%] Overclock Options [Overclock 5%] Overclock Options [Overclock 5%] Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset values.
Configuration options: [Overclock 5%] [Overclock 10%] [Overclock 15%]
[Overclock 20%] [Overclock 30%]
USB Configuration
Module Version - 2.24.0-10.4
USB Devices Enabled: None
USB Function [8 USB Ports]
Legacy USB Support [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
Enables USB host
controllers.