Asus S1 - Manual (Page 30)

30 LED projector E-Manual
Using your LED projector for the first
time
Refer to the following steps when using your LED projector for the
first time.
1. Set up your LED projector then press the power button.
. Press or on your LED projector's control panel to
browse through the available language options.
3. After you have chosen your prefered language, press to set
this language for use on your LED projector.
4. You may now start using your LED projector to display files
from your input device. The NO SIGNAL screen may appear if
no input device is connected or cannot be detected by the LED
projector.
5. Press on your LED projector's control panel to launch its
onscreen display menu.