Asus ET2012IUTS - Manual (Page 29)

English
29 All-in-one PC ET2012 Series
Installing the wall mount screw (optional)
To mount your All-in-one PC to the wall, purchase the optional wall mount screws and wall
mount kit (pad and rack; VESA100, 100mm x 100mm). Install the wall mount screws according
to the following instructions.
1. Place your All-in-one PC face-down on a flat surface, such as a table or desk, and then
remove the two screws beside the stand. Keep the screws for future use in case you want
to reinstall the stand.
2. To release the stand, press the stand downward, shove it forward, and lift. Take out the
stand and put it aside.
1
2
3