2 internal connectors, Internal connectors -29, Internal.connectors – Asus Z7S WS User Manual
Page 51
Advertising
ASUS Z7S WS
2-29
2.9.2.
Internal.connectors
1.. Floppy.disk.drive.connector.(34-1.pin.FLOPPY1)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
Z7S WS
®
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
FLOPPY
Z7S WS Floppy disk drive connector
Advertising