Xoro HMT 350 - Manual (Page 54)

14 HMT 350
Engl
ish
Connection
The connectors of the HMT 350 are:
• Card Reader
• Y Pb Pr / Antenna
• CVBS / AV output
• LINE IN
• USB for Power connection
Power connection
Connect the USB mini connector of the AC/DC power adapter with the Mini USB port of the
device. Connect the power plug of the AC/DC adapter with the wall outlet.
Antenna
1.
The HMT 350 has a FM radio. For radio reception connect the supplied antenna
cable to the YPbPr plug.
2. The HMT 350 has an integrated WLAN antenna.
Note:
Look here on the orientation of the antenna and check the reception quality of FM radio or the
wireless local area network (WLAN).
Component video output (YPbPr)
You can connect to the HMT 350 an external larger screen by the video component input.
Connect the three-pin video cable to the "Y Pb Pr / YUV" input of a TV. Please pay attention
to the colour coding on the TV.
Now connect the 3.5 mm jack to the HMT 350 by the YPbPr plug.
Select the video output to the TV OUT button or by the Settings menu (Settings -> Video Output ->
TV output -> YPbPr) and start the feature with the ENTER key. The image on the small screen
switched off and on the TV appears the picture. The sound is still spent on the speakers of the HMT
350.
Repeatedly pressing the TV OUT button ends the video output of the HMT 350 and on the small
screen of the HMT 350 back is an image visible.
The PIN assignment of the cable is shown as follows:
Y
Y Video Channel
Pb Pb Video Channel
Pr Pr video signal
GND Ground
Y
Pb Pr
GND