Asus L1N64-SLI WS/B - Manual (Page 83)

ASUS LN-SLI WS/B -2
4.4.4 Onboard Devices Configuration
Onboard Floppy Controller [Enabled]
Allows you to enable or disable the onboard floppy controller
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base address.
Configuration options: [Disabled] [378] [278]
Parallel Port Mode [EPP+ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [EPP+ECP]
EPP Version [1.9]
Appears only when the Parallel Port Mode is set to [EPP] or [EPP+ECP]. This item allows the
BIOS to select the Parallel Port EPP version.
Configuration options: [1.9] [1.7]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP] or [EPP+ECP]. This item allows the
BIOS to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]
Configure ITE8712 Super IO Chipset
Onboard Floppy Controller
[Enabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [EPP+ECP]
EPP Version [1.9]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Configure Onboard Device
OnBoard VT6308 1394 [Enabled]
OnBoard Sil3531 eSATA [Enabled]
eSATA OptionROM [Disabled]
Allows BIOS to Enable
or Disable Floppy
Controller.