Asus ASMB4-iKVM - Manual (Page 22)

2-6 Chapter 2: Installation
2.3.2 Configure BMC IP source static IP
1. Repeat the step 1-4 in the previous sub-section.
2. On reboot, the main menu appears.Select Configure BMC IP Source Static IP
for LAN1 (or LAN3), and press <Enter> to enter the sub-menu.
4. When the configuration is completed, the below screen appears.
3. A confirmation message appears, asking if you want to configure the BMC IP
source static IP now. Select <Yes> to continue.
Detect Motherboard -> (Z8PE-D12X)
Detect KCS Interface
New BMC IP Source : Static IP
Press any key to continue ...
5. Go to BIOS menu to set the IP. Refer to section 2.4 for IP settings in BIOS
menu.
ASUS Server Z8PE-D12X MB
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for LAN3
Configure BMC IP Source DHCP for LAN3
ASMB4-iKVM Firmware Update for Preserve Configuration
ASMB4-iKVM Firmware Update for Clear Configuration
WARNING !!!
CONFIGURE BMC IP Source STATIC IP NOW !
DO YOU WANT TO CONTINUE ?
No Yes