Asus O!Play HDP-R1 - Manual (Page 11)

Chapter 1: Getting started 1-4
Ensure that the IR receiver is not blocked. Otherwise, the Media Player will not
be able to receive the command from the remote control.
Rear panel
1
Analog audio output (red and white)
Insert the left and right audio cable jacks to connect to a television or other
audio equipment.
2
Analog video output (yellow)
Insert a composite cable to connect to a television or other video equipment.
3
Digital audio output (S/PDIF)
Insert an optical cable into this port to connect an external Hi-Fi audio system.
4
HDMI port
Insert an HDMI cable into this port to connect to a high-definition multimedia
interface (HDMI) device.
5
LAN (RJ-45) port
Insert an RJ-45 cable into this port to connect to a local area network (LAN).
6
Power (DC-In) input
Insert the power adapter into this port.
1 3 4 5 6 2
5
LED indicators
Displays the status of the HD media player.
LED Status Description
Power OFF The device is turned off.
Red The device is in sleep mode.
Blue The device is turned on.
Storage OFF No storage device is found.
Blinking Receiving data from a storage device.
ON A storage device is found.