Asus ET2311IUTH - Manual (Page 56)

English
56 All-in-One PC ET2311 Series
Using the Recovery Partition in Windows ® 7
Recovering the OS to the Factory Default Partition (F9 Recovery)
1. Press [F9] during bootup.
2. Select
Windows setup [EMS Enabled] when this item appears and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. The factory default partition will be displayed. Click Next.
6. Data on the default partition will be cleared. Click Recover to start the system recovery.
IMPORTANT! You will lose all your data on the selected partition. Ensure to back up your
important data beforehand.
7. When the recovery is completed successfully, click Reboot to restart the system.
Backing up the Factory Default Environment Data to a USB Drive (F9
Backup)
1. Repeat steps 1-3 in the previous section.
2. Select
Backup the Factory Environment to a USB Drive and click Next.
3. Connect a USB storage device to your PC to start the Factory Default Environment backup.
NOTE: The required size of the connected USB storage device should be larger than 20GB. The
actual size may vary with your PC model.
4. Select the desired USB storage device if more than one USB storage device is connected
to your All-in-One PC and click Next.
NOTE: If there is already a partition with the right size in the selected USB storage device (for
example, a partition that has been used as the backup partition), the system will show this
partition automatically and reuse it for backup.
5. Based on your selections from the previous step, data on the selected USB storage device
or on the selected partition will be cleared. click Backup to start backup.
IMPORTANT! You will lose all your data on the selected USB storage device or on the selected
partition. Ensure to back up your important data beforehand.
6. When backing up the factory default environment is completed successfully, click Reboot
to restart the system.