Asus Xonar HDAV1.3 - Manual (Page 33)

27 ASUS Xonar HDAV 1.3
No Item Description
1 Support link Clicking this button will lead you to the ASUS official website.
2 Display Area This display area shows the 10-band signal meter, volume
level, and the status of the Dolby/DTS technologies, EQ, and
DSP modes. Note: this area just displays information, but is
not used to alter settings.
3 HDMI Out mode Click this button when you connect the Xonar HDAV 1.3 card
to an HDMI device.
4 Analog Out mode Click this button when you connect the Xonar HDAV 1.3 card
to powered analog speakers or digital home theater systems,
etc.
5 Setting Menu Panel This panel gives access to setting tabs, including Main
Settings, Mixer/volume, Effects, Karaoke/MagicVoice, and
FlexBass. (see the following details)
6 Information icon Clicking this icon will pop up driver’s Information window.
7 Menu Open/Close Clicking this button will move the display area and reveal
the configuration area below. Clicking it again will move the
display area back down.
8 Audio/Video
configuration switch
Click the corresponding switch to configure the related
settings while using the audio/video features.
9 Master Volume This rotary knob controls the master playback volume. Drag
the small circle inside it to change the volume level.
10 Mute Button Click this button to mute audio playback; it will display a red
light when playback is muted.
11 SVN Button Click this button to enable the “Smart Volume Normalization”
feature for constant volume from all playback sources. It will
display a blue light when enabled.
12 DSP Mode These 4 buttons give access to quick sound effects
combinations for Music, Games, DVD Video, and effect-free
(Hi-Fi) modes.