Asus MAXIMUS VI IMPACT - Manual (Page 92)

3-8 Chapter 3: BIOS setup
Chapter 3
Load 195 BCLK Profile
Allows you to load the 195 Base Clock profile.
Configuration options: [Yes] [No]
Load 200 BCLK Profile
Allows you to load the 200 Base Clock profile.
Configuration options: [Yes] [No]
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
The following items appear only when you set the Ai Overclocking Tuner to [Manual] or
[XMP].
CPU Strap [Auto]
Allows you to select a strap close to your target BCLK (base clock) or leave it at
[Auto] for the BIOS to decide.
Configuration options: [Auto] [100MHz] [125MHz] [167MHz] [250MHz]
PLL Selection [Auto]
Set this item to [SB PLL] if you want to overclock the system beyond 100MHz DMI
frequency. Set to [LC PLL] for less jittery system performance.
Filter PLL [Auto]
Allows you to select a BCLK (base clock) mode when running in a high or low BCLK.
Configuration options: [Auto] [Low BCLK Mode] [High BCLK Mode]
BCLK Frequency [100.0]
Allows you to set the BCLK frequency to enhance the system performance. Use the
<+> or <-> to adjust the value. The values range from 60.0MHz - 300.0MHz.
Initial BCLK Frequency (Auto)
Allows you to set the initial BCLK (base clock) frequency to enhance the system
performance. Use the <+> or <-> to adjust the value. The values range from 85.0MHz
- 100.0MHz.
The following item appears only when you set the Ai Overclocking Tuner to [XMP].
XMP DDR3 (eXtreme Memory Profile) [Profile #1]
Allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [Profile #1] [Profile #2]