Asus ET1602C - Manual (Page 18)

English
18 EeeTop PC ET16 Series
Positioning your EeeTop PC
Placing on the desktop
Place your EeeTop PC on a flat surface such as a table or desk, and pull the stand open until it pull the stand open until it
snaps in place. Then, tilt the display panel to an angle of between 10 and 35 degrees from an
upright position.
0° 10°
Mounting to the wall
To mount your EeeTop PC to the wall, purchase the optional wall mount pad (160mm x
92mm) and a wall mount kit (VESA 75). Install the wall mount pad according to the following
instructions.
1. Remove the four screws on the stand to
release the stand. Keep the screws for
future use in case you want to reinstall the
stand.
0°
35°