3 installing three sli-ready graphics cards, Installing three sli-ready graphics cards -7 – Asus P9X79 WS User Manual
Page 177
Advertising
ASUS P9X79 WS
5-7
5.2.3
Installing three SLI-ready graphics cards
3-Way SLI bridge
1. Prepare three SLI-ready graphics
cards.
2. Insert the three graphics card
into the PCIEX16 slots. If your
motherboard has more than two
PCIEX16 slots, refer to Chapter 2
in this user manual for the locations
of the PCIEX16 slots recommended
for multi-graphics card installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and firmly insert the 3-
Way SLI bridge connector to the
goldfingers on each graphics card.
Ensure that the connector is firmly
in place.
5. Connect three independent auxiliary
power sources from the power
supply to the three graphics cards
separately.
6. Connect a VGA or a DVI cable to
the graphics card.
Advertising