Asus P4-P5G41 - Manual (Page 70)

4-30 Chapter 4: BIOS setup
4.6.2 Boot Settings Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When this item is set to
[Disabled], BIOS performs all the POST items. Configuration options: [Disabled]
[Enabled]
Full Screen Logo [Enabled]
Enables or disables the ASUS MyLogo2 feature. Configuration options: [Disabled]
[Enabled]
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM. Configuration options: [Force BIOS]
[Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration options:
[Off] [On]
Wait For ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the <F1> key to be
pressed when error occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When this item is set to [Enabled], the system displays the message Press DEL
to run Setup during POST. Configuration options: [Disabled] [Enabled]