Asus P3-PH4 - Manual (Page 7)

7 Installation manual
English
Installing an expansion card
1. Lift the expansion card
lock to a 90º-100º angle.
. Remove the metal cover
opposite the slot that you
intend to use.
3. Insert the card connector
to the slot, and press the
card firmly until it fits in
place.

1
3
Installing an optical drive
1. Drive a screw to the screw hole on
both sides of the optical drive.
. Connect the IDE/SATA signal plug
(A) and IDE/SATA power plug (B)
to the connectors at the back of the
IDE/SATA optical drive.
3. Push the drive all the way into the
bay until the drive lock clicks.
1
Installing a SATA hard disk drive
1. Drive two screws with rubber
washers on both sides of the hard
disk drive.
1
NOTE: Before using the hard disk
drive screws, put the supplied rubber
washers onto the screws.
B
A
3
IDE
B
A
3
SATA