Asus RT-N16 - Manual (Page 6)

6
1
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
2
2.4GHz LED
Off: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
3
LAN LED
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
Flashing: Transmitting or receiving data via Ethernet cable.
4
WAN LED
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
Flashing: Transmitting or receiving data via Ethernet cable.

Power (DC-In) port
Insert the bundled AC adapter into this port and connect your router to a power source.
6
WPS button
This button launches the WPS Wizard.
7
USB 2.0 ports
Insert USB 2.0 devices such as USB hard disks or USB flash drives into these ports.
8
Reset button
This button resets or restores the system to its factory default settings.
9
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
Flashing: Transmitting or receiving data via wired connection.
10
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.