3 onboard devices configuration, Onboard devices configuration -25, Chapter 3 – Asus P7P55D-E Premium User Manual

Page 89: Hda controller [enabled, Realtek lan1/2 [enabled, Onboard 1394 controller [enabled, J-micron pata controller [enabled, Serial port1 address [3f8/irq4, Marvell controller [ide mode

Advertising
background image

ASUS P7P55D-E Premium

3-25

Chapter 3

HDA Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

Front Panel Type [HD Audio]

[AC97]

Set the front panel audio connector (AAFP) mode to legacy AC’97

[HD Audio] Set the front panel audio connector (AAFP) mode to high-definition audio.

Realtek LAN1/2 [Enabled]

[Enabled]

Enables Realtek LAN Controller 1/2.

[Disabled]

Disables Realtek LAN Controller 1/2.

LAN Boot ROM [Disabled]

This item appears only when you enable the previous item(s).
[Disabled] Disables Realtek LAN Boot ROM.
[Enabled] Enables Realtek LAN Boot ROM.

Onboard 1394 Controller [Enabled]

[Enabled]

Enables the onboard 1394 Controller.

[Disabled]

Disables the controller.

J-Micron PATA Controller [Enabled]

[Disabled]

Disables the J-Micron controller.

[Enabled]

Enables the J-Micron controller.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Marvell Controller [IDE Mode]

[Disabled]

Disables the Marvell controller.

[IDE Mode]

Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as

Parallel ATA physical storage devices.

[AHCI Mode]

Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

(Advabced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

3.6.3

Onboard Devices Configuration

Onboard Devices Configuration

HDA Controller

[Enabled]

Front Panel Type

[HD Audio]

Realtek LAN1

[Enabled]

LAN Boot ROM

[Disabled]

Realtek LAN2

[Enabled]

LAN Boot ROM

[Disabled]

Onboard 1394 Controller

[Enabled]

J-Micron PATA Controller

[Enabled]

Serial Port1 Address

[3F8/IRQ4]

Marvell Controller

[IDE Mode]

BIOS SETUP UTILITY

Advanced

Options

Enabled

Disabled

Advertising