Asus BP5220 - Manual (Page 66)

3-30 Chapter 3: BIOS setup
3.5.4 APM Configuration
APM Configuration
Restore on AC Power Loss [Power Off]
Power On by RTC Alarm [Disabled]
Power On by External Modems [Disabled]
Power On PCI Devices [Disabled]
Power On By PCIE Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On]
[Last State]
Power On By RTC Alarm [Disabled]
Disable/Enable RTC to generate a wake event. Configuration options: [Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By External Modems [Disabled]
Disable/Enable RI to generate a wake event. Configuration options: [Disabled]
[Enabled]
Power On By PCI Devices [Disabled]
Disable/Enable PME to generate a wake event. Configuration options: [Disabled]
[Enabled]
Power On By PCIE Devices [Disabled]
Configuration options: [Disabled] [Enabled]
Go into On/Off,
or Suspend when
Power button
is pressed.
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]