Asus ASMB3-SOL PLUS - Manual (Page 20)

2-6 Chapter 2: Installation
3. A screen appears, showing the current (if any) firmware version, and the new
firmware version. The screen also displays a confirmation message asking
whether or not you want to update the firmware appears. Press <Y> to update.
Current Firmware Version : 2.01 (RS162-E4/RX4)
Update Firmware Version : 2.02 (RS162-E4/RX4)
Do you want to update firmware (y/n)?
Now, Starting to update firmware
Detect Flash Type = 2168
Programming Flash ...
Progress : 100
Initial BMC. Please wait..
Wait BMC ready.
Initial BMC O.K.
Update firmware Finish!
Detect MotherBoard -> (RS162-E4/RX4)
Detect KCS Interface
Size of SDR is 3584 bytes
enter update mode
Clear SDR ? (Y/N)
Clear SDR.
Loading SDR
SDR Loaded !
Exit update mode
Press any key to continue . . ._
4. When the update is complete, turn off the system and unplug the AC power
cord for 5 seconds before restarting the system.
Current Firmware Version : 2.01 (RS162-E4/RX4)
Update Firmware Version : 2.02 (RS162-E4/RX4)
Do you want to update firmware (y/n)?
The firmware updating process starts.
2.3.2 ASMB3-SOL PLUS firmware update
1. Repeat the step 1-4 in the previous sub-section.
2. On reboot, the main menu appears.Select ASMB3-SOL PLUS Firmware
Update, and press <Enter> to enter the sub-menu.
ASUS Server RS162-E4/RX4 System
FreeDOS command prompt
ESB2 ASF Firmware Update
ESB2 IPMI Firmware Update
ASMB3-SOL PLUS Firmware Update
Configure BMC IP Source Static IP
Configure BMC IP Source DHCP