Asus ET2220IUTI - Manual (Page 17)

English
17 All-in-one PC ET2220
Mounting to the wall
To mount your ASUS All-in-one PC to the wall, purchase optional wall mount screws and a
wall mount kit (VESA 100). Install the wall mount components according to the following
instructions.
1. To release the stand, place the All-in-one
PC face-down first, resting the display
panel on a flat even surface.
2. Remove the back cover.
3. Remove the four screws on the stand and
save for future reinstallation (A). Take out
the stand and put it aside (B).
4. Replace the back cover that you removed
earlier.
1
2
A
B