Connection, Video system connection – Hyundai H-DVD5061 User Manual
Page 13
H-DVD5061 (
13
Connection
Attention: Before connection disconnect the AC power supply cord.
Video system connection
The following video outputs are available for this unit.
Composite video
Use the AV cable (yellow terminal) to connect composite VIDEO output of this unit to the
TV/monitor video input.
S-Video
Use the S-video cable to connect the S-VIDEO output of this unit to the TV/monitor S-video
input.
Component video (YUV)
Use 3-core AV cable to connect the component output terminals of this unit to the corresponding
TV/monitor input.
SCART
Use a 21-pin SCART cable to connect the SCART output to the TV/monitor SCART input
terminal.
Notes:
Which connection depends on the TV/monitor input terminal.
Don't use all connections at one time; otherwise the picture will be affected.
Only the physical connection conforms to the video setting can produce the normal picture
(reference to the Video setup in System setup).
S-Video Video
Component
video input
Component
video output
Video and S-Video
outputs
SCART
output
SCART
input