Asus P2B-N - Manual (Page 33)

ASUS P2B-N User’s Manual 33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
3) PS/2 Mouse Connector (6-pin PS2KBMS)
The system will direct IRQ12 to the PS/2 mouse if one is detected. If not de-
tected, expansion cards can use IRQ12. See PS/2 Mouse Control in 4.4 BIOS
Features Setup.
PS/2 Mouse (6-pin female)
PS/2 Keyboard (6-pin female)
4) PS/2 Keyboard Connector (6-pin PS2KBMS)
This connector is for a standard keyboard using a PS/2 plug (mini DIN). This
connector will not allow standard AT size (large DIN) keyboard plugs. You
may use a DIN to mini DIN adapter on standard AT keyboards.
5) Fast-Ethernet Port Connector (RJ-45)
The RJ-45 connector is optional at the time of purchase. This connector allows the
motherboard to connect to a Local Area Network (LAN) through a network hub.
RJ-45
6) LAN Diagnostic LEDs (LAN_LED)
These diagnostic LEDs help indicate if there is a problem with the network
connector, cable, or hub.
1
2
3 Green
Yellow
Green
LED on LED off
1 Speed 10Mbps 100Mbps
2 Activity No data Data transfer
3 Link Bad connection Good connection